FLEXEOR 1SN/R1AT ISO-1436–SEA 100R1AT/R1S Hydraulic Hose.single wire braid hydraulic hose on easy-to-handle reels-tr1sn.tr1sn-formerly t836aa/t836aa.single wire braid : meets or exceeds sae 100r1at-en853 1sn msha ic-152/8 approved. FLEXOR 2SN/R2AT ISO-1436-1–SEA 100 R2AT/R2S Hydraulic Hose.double wire braid hydraulic hose on easy-to-handle reels-tr2sn.tr2sn-formerly t846aa.double wire braid: meets or exceeds sae 100 r2at-en 853 2sn msha ic-152/8 approved tr2sn-formerly t841aa.double wire braid:Meets or exceeds sae 100r2a FLEXOR 3 SAE 100R3-EN854 R3–DN Hydraulic Hose.textile-reinforced hydraulic hose with two braids-tr3.tr3-formerly t870aa.two High tensile textile braids-meets or exceeds sae 100r3-en854 r3–dn FLEXOR 4SP SAE 100R12-EN 856 4SP and ISO 3862 Hydraulic Hose.four layer wire spiral reinforced hydraulic hose-t4sp.t4sp-formerly t850aa.four wire spiral :-meets or exceeds sae 100r12-en 856 4sp and iso 3862-meets flame resistance acceptance designation us msha ic-152/8 FLEXOR 5 SAE 100 R5 Hydraulic Hose.One-wire braid hydraulic hose-TR5.TR5-formerly t805aa One-wire braid-reinforced-Meets or exceeds sae 100 r5

STEAM HOSE AH-RED/AH-BLACK : EPDM T330AH / T330AA - 17 BAR OR 250 PSI T330AH /T330AA - 250 PSI EPDM STEAM HOSE APPLICATION:The transfer of saturated steam up to 250 PSI AND 406°F. Use with superheated steam will shorten hose life. * Proper draining of steam hose after each use will increase service life. * Not recommended for washdown applications where detergent or oils are present. WORKING PRESSURE : Constant Pressure — 17 Bar (250 PSI)

PETROLEUM SUCTION HOSE OR FUEL - OIL S&D T605 - 10 BAR OR 150 PSI BLACK T605AA - 150 PSI Black Petroleum Suction Hose Application: For suction and discharge applications in truck and tank car transfer of gasoline, oil and other petroleum-based products with up to 50% aromatic content. Note: T605AA is not recommended for use on a reel. WORKING PRESSURE : Constant Pressure 150 PSI Construction : -Tube: Black conductive NBR -Reinforcement : High tensile textile cords and steel helix wires. Cover : Black CR – abrasion, ozone and hydrocarbon resistant. Temperature : -22 to 176 ºF ,-30 to 80 ºC

  FLEXOR 2SN/R2AT ISO-1436-1 –SEA 100 R2 AT/R2S Hydraulic Hose Application HIGH PRESSURE HYDRAULIC LINES, FUEL OIL, ANTIFREEZE SOLUTIONS, AIR AND WATER

Flexor 3 Hydraulic Hose Textile-reinforced hydraulic hose with two braids - TR3 Application MEDIUM PRESSURE HYDRAULIC LINES, FUEL OIL, ANTIFREEZE SOLUTIONS, AIR AND WATER.

FLEXEOR 1SN/R1AT ISO-1436 –SEA 100R1 AT/R1S Hydraulic Hose Application HIGH PRESSURE HYDRAULIC LINES, FUEL OIL, ANTIFREEZE SOLUTIONS, AIR AND WATER.

HYDRAULIC HOSE FLEXOR 4SP SAE 100R10 - EN856 4SP : WIRE SPIRAL - 850AA APPLICATION : VERY HIGH PRESSURE HYDRAULIC LINES, FUEL OIL, ANTIFREEZE SOLUTIONS, AIR AND WATER.

HYDRAULIC HOSE FLEXOR 5 SEA 100R5 - J1402 DOT ALL FM VSS 106 : WIRE BRAID - 805AA Application MEDIUM PRESSURE HYDRAULIC LINES, FUEL OIL, ANTIFREEZE SOLUTIONS, AIR AND WATER.

STEAM HOSE COVER.BLACK - EPDM T330AA : SATURATED STEAM 17 BAR (250 PSI) STEEL REINFORCED BS 5342 / 2A NFT 47263 / I3 T330AA - 250 PSI EPDM STEAM HOSE APPLICATION : The transfer of saturated steam up to 250 PSI AND 406?F. Use with superheated steam will shorten hose life. * Proper draining of steam hose after each use will increase service life. * Not recommended for washdown applications where detergent or oils are present. WORKING PRESSURE : Constant Pressure ? 17 Bar (250 PSI)

  STEAM HOSE AH-RED : EPDM T330AH - 17 BAR OR 250 PSI 330AH - 250 PSI EPDM STEAM HOSE APPLICATION:The transfer of saturated steam up to 250 PSI AND 406?F. Use with superheated steam will shorten hose life. * Proper draining of steam hose after each use will increase service life. * Not recommended for washdown applications where detergent or oils are present. WORKING PRESSURE : Constant Pressure ? 17 Bar (250 PSI)

HYDRAULIC HOSE FLEXOR 12 MSHA SAE 100 R12 - EN 856 R12 : WIRE SPIRAL - 898AA APPLICATION: VERY HIGH PRESSURE HYDRAULIC LINES, FUEL OIL, ANTIFREEZE SOLUTIONS, AIR AND WATER

HYDRAULIC HOSESE / Alfagoma Flexor 13 - MSHA SAE 100 R13 - EN 856 R13 Application: very high pulsating pressure in hydraulic lines, fuel oil, antifreeze solutions, air and water, most severe environments

HYDRAULIC HOSESE / Alfagoma Flexor 2ST - R2A EN 853 2ST - SAE 100 R2A Application: high pressure hydraulic lines, fuel oil, antifreeze solutions, air and water

HYDRAULIC HOSE FLEXOR 6 SAE 100R6 - EN 854 R6 : TEXTILE BRAID - 806AA FLEXOR 6 SAE 100 R6 - EN 854 R6 Textile-reinforced hydraulic hose with one braid - TR6 Application LOW PRESSURE HIDRAULIC LINES, FUEL OIL, ANTIFREEZE SOLUTIONS, AIR AND WATER. SPECIALLY DESIGNED FOR USE IN "PUSH ON" APPLICATIONS