CAMLOCK AND GROOVE FITTINGS TYPE F-MAT. BRASS Description: Typically, Type F adapters are used with Type B couplers, although, they can also be used with a Type C coupler, D coupler or a DC (Dust Cap) that is the same size.

CAMLOCK AND GROOVE FITTINGS TYPE DC-MAT. ALUMINUM All Aluminum Couplers and Adapters Dust Caps (DC) can be used with type A, Type E and Type F adapters to seal the end of the connection.

CAMLOCK AND GROOVE FITTINGS TYPE DC-MAT. STAINLESS STEELL SUS304-316 All Stainless Steel Camlocks ● Dust Caps (DC) can be used with Type A, Type E and Type F adapters ● Used to seal the end of the connection.

CAMLOCK AND GROOVE FITTINGS TYPE DC-MAT. POLYPROPYLENE All Polypropylene Couplers and Adapters ● A Dust Plug (Type DC) can either be used used with a Type A, Type E or Type F adapter. ● Used to cap the end of a Male Adapter

CAMLOCK AND GROOVE FITTINGS TYPE DC-MAT. BRASS Description: ● A DC (Dust Cap) can be used with a Type A, E or F adapter to cap the end of a connection.

CAMLOCK AND GROOVE FITTINGS TYPE DP-MAT. ALUMINUM All Aluminum Couplers and Adapters Dust Plugs (DP) can be used with type B, Type C and D couplers to seal off the end of the connection

CAMLOCK AND GROOVE FITTINGS TYPE DP-MAT. STAINLESS STEELL SUS304-316 All Stainless Steel Camlocks ● Dust Plugs (DP) can be used with Type B, Type D and Type C couplers ● Used to plug and seal off the end of the connection.

CAMLOCK AND GROOVE FITTINGS TYPE DP-MAT. POLYPROPYLENE All Poly Couplers and Adapters ● A Dust Plug (Type DP) can either be used with a Type B, Type C or Type D coupler. ● Used to plug the end of a Female Coupler.

CAMLOCK AND GROOVE FITTINGS TYPE DP-MAT. BRASS all Brass Camlocks ● Brass Dust Plugs - Type DP, can be used with type B, Type C and Type D couplers in order to seal the fitting. ● Will only connect with Female Couplers and are used to the seal line to keep dust out.

Blast Hose, 2-Braid No. 23750, 23751, 2-Braid – Thicker outer wall and sturdier than Supa Blast Hose, yet still flexible. Designed for industrial settings where external scuffing can be expected.

Blast Hose Supa Supa – Lightweight, mobile blast hose less likely to fatigue operators. Perfect for operator whip hoses or short runs of hose from the blast machine.

Blast Hose 4-Ply No. 23444, 23445 4-Ply – The most durable Clemco Blast Hose because of its extra-thick outer wall. Designed for long runs of hose in industrial settings. Resistant to scuffing caused by dragging and can even resist occasional light vehicle traffic without collapsing.

TEFLON SHEET : VIRGIN PTFE SHEET (TEFLON) • Density (g/cm3) : 2.20-2.35 • Tensile Strength (Mpa) : 20 • Elongation at Tear (%) : 200% • Hardness : 50-60 Shore D Temperature range properties • Low temperature applications: -1°C to -268°C • Continuous low temperature applications (constant) : -268°C • High temperature applications : +240°C to +260°C • Continuous high temperature applications (constant) : +260°C Mechanical and Physical Properties • Reduces the ability of other materials to adhere to the surface • Elongation at Tear (%) : 200% • Excellent chemical resistance • High temperature resistance • Low friction • Acts as an electrical insulator • Safe for food

PREMIUM GRADE : NR Rubber Sheet [THNR0982438R] Premium Grade Premium Grade Rubber Sheet : NR Rubber Sheet • Product Name : NR Rubber Sheet • Product Code : THNR0982438R • Product Grade : Premium Grade Premium Grade Rubber Sheet • Polymer : NR • Color : Red Mechanical and Physical Properties • Density (g / cm3) : 0.98 • Tensile Strength (MPa) : 24 • Elongation at Tear (%) : 750% • Hardness : 38+/-5 Shore A • Tear Resistance (N / mm) : 50 • Rubber Wear Test (mm3) : 80 • Compression Recovery (72 hrs. Test at 70 ° C) : 30% Related applications • Tank coating • Solvent handling • Pipe coating • Pump coating • Chute coating • Valve coating • Belt production • Hydrocyclones coating • Skirt board coating • Pulley covering Properties Operating temperature range • Low temperature application : -1°C to -40°C • Continuous low temperature application (static) : -40°C • High temperature application : +60°C to +90°C • Continuous high temperature application (static) : +90°C

PREMIUM GRADE : Peroxide Cured NBR Rubber Sheet [TXNBR1261360B] Mechanical and Physical Properties • Density (g/cm3) : 1.26 • Tensile Strength (MPa) : 13 • Elongation at Tear (%) : 400% • Hardness : 60 +/-5 Shore A • Tear Resistance (N/mm) : 30 • Compressive recovery (72 hours test at 70°C) : 20% Related applications • Automotive industry • Oil and gas industry • Aviation industry • Liquid energy • Transmission belts • Automotive transmission systems • Related to animal oils • Fuel systems • Dilute acids • Food safe Temperature range properties • Low temperature applications : -1°C to -40°C • Continuous low temperature applications (fixed) : -40°C • High temperature applications : +100°C to +125°C • Continuous high temperature applications (fixed) : +125°C

COMMERCIAL GRADE : แผ่นยาง NBR/SBR Rubber Sheet [CNNBR15365B] 100 KG Mechanical and physical properties • Density (g/cm3) : 1.50 • Tensile strength (MPa) : 3 • Elongation at break (%) : 150% • Hardness : 65 +/-5 Shore A Related applications • Used in applications involving water • Used in applications involving diluted chemicals • Low quality rubber seals • Low quality rubber gaskets Properties of operating temperature range • Application in low temperature range : -1°C to -20°C • Application in low temperature range (constant) : -20°C • Application in high temperature range : +60°C to +80°C • Application in high temperature range (constant) : +80°C

COMMERCIAL GRADE : CR/SBR Rubber Sheet [CNCR15365B] 100 KG Mechanical and physical properties • Density (g/cm3) : 1.50 • Tensile strength (MPa) : 3 • Elongation at break (%) : 150% • Hardness : 65 +/-5 Shore A Related applications • Used in applications involving water • Used in applications involving diluted chemicals • Low quality rubber seals • Low quality rubber gaskets Properties of operating temperature range • Application in low temperature range : -1°C to -20°C • Application in low temperature range (constant) : -20°C • Application in high temperature range : +60°C to +80°C • Application in high temperature range (constant) : +80°C

COMMERCIAL GRADE : EPDM/SBR Rubber Sheet [CNEP15365B] 100 KG Mechanical and physical properties • Density (g/cm3) : 1.50 • Tensile strength (MPa) : 3 • Elongation at break (%) : 150% • Hardness : 65 +/-5 Shore A Related applications • Used in applications involving water • Used in applications involving diluted chemicals • Low quality rubber seals • Low quality rubber gaskets Temperature range properties • Low temperature applications : -1°C to -20°C • Low temperature applications (constant) : -20°C • High temperature applications : +60°C to +80°C • High temperature applications (constant) : +80°C

BABSL OIL Seals viton Sealing in pressurized environments without additional backup rings, for example: rotational pressure sealing in hydraulic pumps, hydraulic motors, hydrodynamic couplings. Particularly suitable for sealing low viscosity and gaseous media. Materials NBR 72 Shore A, also available in FKM and HNBR. Working Pressure Media: Mineral oils, Synthetic oils Temperature: -40°C to +100°C (Material 72 Nitrile NBR 902) -30°C to +200°C (Material 75 Viton FKM 595) Surface Speed: Up to 5 m/s

BABSL OIL Seals NBR Seal Design Overview BABSL high pressure rotary seals, available in metric and imperial sizes to suit a wide variety of applications. Pressure resistant style for use without back-up ring, dust lip to protect against outside contaminants, rated up to 10 bar (depending on other operating conditions). Applications Sealing in pressurized environments without additional backup rings, for example: rotational pressure sealing in hydraulic pumps, hydraulic motors, hydrodynamic couplings. Particularly suitable for sealing low viscosity and gaseous media. Materials NBR 72 Shore A Working Pressure Media: Mineral oils, Synthetic oils Temperature:-40°C to +100°C (Material 72 Nitrile NBR 902) Surface Speed: Up to 5 m/s