Sign In
Stainless Steel Flanges Grange 304
หน้าแปลนแตนเลสเชื่อม เกรด 304
JIS-10K
DIN-PN16
ANSI-150P
E-Catalog > Camlock Coupling & Groove And Pin Lug Coupling > CAMLOCK COUPLING & GROOVE AND PIN LUG COUPLING - PIN LUG HOSES
PAGE VIEW : 22,424
Product Information :
Name :
CAMLOCK COUPLING & GROOVE AND PIN LUG COUPLING - PIN LUG HOSES Category :
- เครื่องจักร, อุปกรณ์เกี่ยวกับเครื่องจักร, เครื่องมือกล
Sub - Category :
- Camlock Coupling & Groove And Pin Lug Coupling
Brand :
AUTOFLEX Product Type :
- เครื่องมือ, เครื่องจักรและอุปกรณ์
- บริการ
- วัตถุดิบ
- สินค้า, ผลิตภัณฑ์
Short Description :
CAMLOCK COUPLING & GROOVE AND PIN LUG COUPLING - PIN LUG HOSES (PIN LUG COUPLING AND PIN LUG HOSES SHANK)
We are offering pin lug coupling, pin lug hose shank, suction hose coupling.
sizes: 1-12" to 6"parts: full set, female set, male set,brass nut body material: aluminum body with brass nut
aluminum brass pin-lug couplings are built of lightweight aluminum with brass pin-lug nut for long lasting durability. Pin-lug style assures strength and reliability. Can be used with hoses capable of handling water or other liquids, providing increased adaptability. Will require clamps to attach hose. Available in sizes 1-12"-6" as female, male and coupling set. 
Product Detail :
CAMLOCK COUPLING & GROOVE AND PIN LUG COUPLING - PIN LUG HOSES (PIN LUG COUPLING AND PIN LUG HOSES SHANK)
PRODUCT DESCRIPTION :
Flanged King Combination Nipples - Steel - 150# ASA Flange x Hose Shank
On hose assemblies, pressure rating is the lower of either the rating of the coupling or the hose at 70 deg. F.
Application:
a. Combination nipples are recommended for low-pressure discharge and suction service for compatible liquids. They are not for compressible products such as air or nitrogen on sizes 1-1/4" and above.
b. King Combination Nipples are not recommended for steam.
The working pressure may vary with the construction of the hose, the type of clamping system used and the application.
c. In accordance with the R.M.A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1-1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement. For additional information and detailed instruction on testing procedures, see the Rubber Manufacturers Association (R.M.A.) handbook.
Size :1 1/2",2",3",4",6",8",10",12"
We are offering pin lug coupling, pin lug hose shank, suction hose coupling.
sizes: 1-12" to 6"parts: full set, female set, male set,brass nut body material: aluminum body with brass nut
aluminum brass pin-lug couplings are built of lightweight aluminum with brass pin-lug nut for long lasting durability. Pin-lug style assures strength and reliability. Can be used with hoses capable of handling water or other liquids, providing increased adaptability. Will require clamps to attach hose. Available in sizes 1-12"-6" as female, male and coupling set.
Pin Lug - Coupling - King - Short Shank - Female - NPSM Threads - 4" - Steel
Our 4" short shank pin lug coupling is a female shank in NPSM threads. It's primary function is to be installed on the ends of a PVC hose or rubber hose. Female end is made of steel, and has iron swivel/nut. This coupling is most commonly used by contractors, but also home owners and rental yards.
Features :
4" female NPSM threads
4" O.D. (Outside Diameter)
Steel shank with iron swivel/nut
Description :
Our 2 1/2" short shank pin lug coupling comes complete with male and female shanks in NST threads. It's primary function is to be installed on the ends of a PVC hose or rubber hose. Male and female ends are made of aluminum, and the female end has brass swivel/nut. This coupling is most commonly used by contractors, but also home owners and rental yards.
Features :
2 1/2" female & male NST threads
2 1/2" O.D. (Outside Diameter)
Aluminum shanks with brass swivel/nut
Product Gallery :
Related Product :
carbon steel socket welded flanges
Product specifications
1.Name: Carbon Steel SW Flanges.
2.Type: Socket Weld Flange.
3.Material: Carbon Steel, ASTM A516.
4.Grade: CL1, CL2.
5.Face: RF.
6.Standard: MSS SP-44.
7.Pressure: PN150 (Class 900LB).
8.Size: 1/2-56 Inch (DN15-DN1400).
Flexible Stainless Steel Hoses Seal
Flexible stainless steel hose (sleeves) sealed, are designed for transportation of liquid and gaseous media, for water, steam, condensate, gas and petroleum products, chemical products. Operate in extreme conditions, operating pressures and temperatures.
Spiral shaped convolution spiral advance profiled steel band with subsequent contact and seam welding. They have a diameter of 6 mm to 300 mm and lengths from 250 to 6000 mm. For the production of this type of hose used stainless strip thickness 0,15-0,40 mm.
High-quality steel airtight hose is not advisable to use in systems with a high level of vibration as the exploitation of metal hoses in such conditions leads to a resonant vibration of the corrugations or shells entirely.
Spiral represented by two species - rolled and corrugated variations. Corrugated metal oloruka made of seamless or longitudinally welded thin-walled tubes, which are formed by special mechanical or hydraulic devices and supplied with end fittings. They are used as low-cost flexible connecting elements as loading hoses and of movement, thermal expansion, vibration absorption.
Corrugated metal hose is completely waterproof, can be used to transfer liquids and gases under high pressure. In addition, the hose to the valve can be used in vacuum systems.
Addition weld metal hoses we supply hoses with flange with thread.
Due to the high reliability and durability to impacts flexible connection was in demand in the market pipelines and has been widely used in the automotive, aerospace, shipbuilding, metallurgy, petroleum, chemical, food, medical industry and many other industries.
FLEXIBLE TEFLON HOSES F-95M-S OM SMOOTH PTFE STAINLESS STEEL BRAID STANDARD DUTY PFA US PHARMACOPEIA-CLASS VI SS304 AND
FLEXIBLE TEFLON HOSES F-95C OM CONVOLUTED PTFE STAINLESS STEEL BRAID STANDARD DUTY PFA US PHARMACOPEIA-CLASS VI SS304
TUBE : Smooth PTFE - High Mechanical And Vibration Resistance, Low Permeability, Dielectrical , Fire Resistant, Food Grade (fda, Dvgw, Bgaapproved).Chemically Inert, Non Sticking, Ozone And Weather Resistant.
REINFORCEMENT : High Tensile stainless Steel Braid AISI 304
APPLICATION : Compressed Air, Gas, Steam, Fuel, Oil, Chemical, Food And Pharmaceutical Products.Particularly Suitable For Steam Piping On Injection Moulding Machines, Diathermic Oil Installations, Charging Lines For Criogenic Gases, Compressor Discharge Lines, Automotive, Pharmaceutical And Food Sectors.Solvents, Pigments And Paint Transferlines.Hydraulic Lines In Power Stearing Marine Applications. Not Suitable For Molten Alkali Metals And Halogens At Elevated Temperature.
TEMPERATURE : -60°C +260°C (-76°F +500°F)
BRAND TYPE : Unbranded
Carbon steel blind flanges
Specifications:
1.Standards: ASME B16.47, ANSI B16.5, DIN, UNI, BS, JIS, GB.
2.Pressure classes range: from 150lbs to 2,500lbs.
3.Sizes range: 1/2" - 24" .
4.Materials: F316, F304, F316L, F304L, A105, F5, F11, F22, 15CrMo, 12CrMoV, Q235, 16Mn, 20#.
5.Printing: Carbon steel and alloy steel with yellow print, black print, oil or zinc.
SLIP - ON FLANGES
Specifications
1.Size:3/8"~40" DN10~DN1000
2.Pressure
American Series: CLASS 150, CLASS 300, CLASS 400, CLASS 600, CLASS 900, CLASS 1500, CLASS 2500
European Series: PN 2.5, PN 6, PN 10, PN 16, PN 25, PN 40, PN 63, PN 100, PN 160, PN 250, PN 320, PN 400
3.Flange Facing Types
American Series: Flat Face (FF), Groove (G), Ring Joints Face(R)
socket welded flanges 1500LB
product specifications
1.SIZE: OD: 1/2” to 24”
2.CLASS: 150LB,300LB,600LB,900LB,1500LB
3.TYPE: Socket Weld
4.MATERIAL: ASME A105, A350LF2, A182 F5、F9、F22、F304、 F304L、 F316、 F316L；
LAP JOINT STUB ENDS - ANSI :SP-LP (SHORT PATTEM - LONG PATTEM ) SUS304 SCH 10S - 40S TYPE A
Lap Joint Stub End Stainless Steel Pipe Fitting JIS B2312 / ANSI B16.9
Lap Joint Flange
With high tensile strength, these steel lap joint flanges are available with a raised face and back ups for easy
installation. Resistant to corrosion, these joint flanges have high tensile strength and weld ability. Use of
superior quality alloy for raw material makes our range extremely durable. Available in standard dimensions,
these lap joint flanges can also be customized as per client's requirement.
PN1.0--------58.0
American Series: CLASS 150, CLASS 300, CLASS 400, CLASS 600, CLASS 900, CLASS 1500, CLASS 2500
European Series: PN 2.5, PN 6, PN 10, PN 16, PN 25, PN 40, PN 63, PN 100, PN 160, PN 250, PN 320, PN 400
Flange Facing Types
Flat Face (FF), Raised face (RF), groove (G), female(F), ring joints face(RJ)
Applications:
We,this type pipe fittings be widely used in kinds of industries:
Paper Making,Waste-water Treatment
Chemical Industry and Natural Gas
Shipbuilding
Electrical equipment
Nuclear Energy
Construction
Petroleum
FLEXEOR 1SN/R1AT ISO-1436–SEA 100R1AT/R1S Hydraulic Hose.single wire braid hydraulic hose on easy-to-handle reels-tr1sn.tr1sn-formerly t836aa/t836aa.single wire braid : meets or exceeds sae 100r1at-en853 1sn msha ic-152/8 approved.
FLEXOR 2SN/R2AT ISO-1436-1–SEA 100 R2AT/R2S Hydraulic Hose.double wire braid hydraulic hose on easy-to-handle reels-tr2sn.tr2sn-formerly t846aa.double wire braid: meets or exceeds sae 100 r2at-en 853 2sn msha ic-152/8 approved tr2sn-formerly t841aa.double wire braid:Meets or exceeds sae 100r2a
FLEXOR 3 SAE 100R3-EN854 R3–DN Hydraulic Hose.textile-reinforced hydraulic hose with two braids-tr3.tr3-formerly t870aa.two High tensile textile braids-meets or exceeds sae 100r3-en854 r3–dn
FLEXOR 4SP SAE 100R12-EN 856 4SP and ISO 3862 Hydraulic Hose.four layer wire spiral reinforced hydraulic hose-t4sp.t4sp-formerly t850aa.four wire spiral :-meets or exceeds sae 100r12-en 856 4sp and iso 3862-meets flame resistance acceptance designation us msha ic-152/8
FLEXOR 5 SAE 100 R5 Hydraulic Hose.One-wire braid hydraulic hose-TR5.TR5-formerly t805aa
One-wire braid-reinforced-Meets or exceeds sae 100 r5