BT600 GROUTING HOSE 600 PSI Mandrel Built Rubber Hose Engineered For The Spraying Of Plaster, Grout, Gypsum And Concrete With A Heavy Construction Which Resists Kinking. Temperature Range : -40˚C (-40˚F) to +85˚C (+185F˚)

OSD400 RIG SUPPLY FUEL/MUD SUCTION HOSE For Discharge Of High Pressure Liquid Mud. Temperature Range : -40˚C to +100˚C

AH600 AIR/WATER HOSE 600 PSI Designed For The Most Severe Working Conditions In Mining, Quarries, Industrial And Construction Service. This Mandrel Built Hose Has A High Margin Safety And Gives A Long And Trouble-Free Service Under The Most Arduous Working Conditions. Temperature Rang : -40˚C (+40˚F) to +100˚C (+212˚F)

OSD600 RIG SUPPLY FUEL/MUD SUCTION HOSE For Discharge Of High Pressure Liquid Mud Temperature Range : -40˚C to +100˚C

CONTRACTOR HOSE For Water Suction And Delivery, In Agricutural Industrial And Construction. Temperature Range : -35˚C (-31˚F) to +70˚C (+158˚F)

'SUNFLEX WDH300-CONTRACTOR HOSE WPSI 75' WATER DELIVERY HOSE 300 PSI Mandrel Built Water Discharge Hose, Widely Used By Industry, Construction Site, etc. Temperature Range : -40˚C (-40˚F) to +85˚C (+185˚F)

WSD150-SP WATER SUCTION/DISCHARGE HOSE 150 PSI Water Suction And Delivery Applications. It Is Recommended That This Hose Must Be Immersed Into Water After The Inside Of The Hose Is Filled Up. Otherwise, The Hose Floats On The Water Because Hose Weight Is Less Than Water. Temperature Range : -30˚C (-22˚F) to +80˚C (+176˚F)

AHT150 ASPHALT HOSE 150 PSI A Strong Yet Flexible Hose, Specially Designed As Tank Truck Or Tank Wagon Hose For Loading And Unloading Hot Asphalt. Temperature Range : -15˚C (-5˚F) to +185˚C (+365F˚)

AHT220 ASPHALT HOSE 200 PSI A Strong Yet Flexible Hose, Specially Designed As Tank Truck Or Tank Wagon Hose For Loading And Unloading Hot Asphalt. Temperature Range : -15˚C (-5˚F) to +185˚C (+365F˚)

SBH150 SAND BLASTING HOSE 150 PSI A Long Lasting Heavy Duty Hose Exceptionally Tough And Abrasion Resistant For Use In Sand And Steel Blasting Service. It Is Manufactured With Anti-static Rubber Granting A Complete Discharge Of Static Electricity. Temperature Range : -40˚C (-40˚F) to +85˚C (+185F˚)

WB30 WATERBLAST HOSE Ultra High Water Blasting Applications Only. Temperature Range : -40˚C (-40˚F) to +100˚C (+212˚F) +121˚C (250˚F)

CFD75 CEMENT FLAT DISCHARGE HOSE For Discharge Of Dry Cement From Tank Truck, In-plant Service And Abrasive Powders For Lorries And Silos. Temperature Range : -40˚C to +70˚C

JH1232 SUNFLEX JETTING HOSE 1232 PSI Application : Flexible Connection Between Main Deck And Legs Of Jack Up Rigs For Water Jetting. Abrasion Resistant Tube, Designed For High Kink Resistance. Temperature Range : -30 degC to +70 degC

SUNFLEX 352 VERY HIGH PRESSURE HOSE WP 10000PSI APPLICATION : Very High Pressure Hydraulic Lines 520 To 700 Bar. Compact, High Pressure, Light Weight, High Abrasion Resistance And Low Change In Length. For Use With Petroleum, Synthetic Or Water Based Fluids In Hydraulic Systems. Mainly Used For Rescue, Safety Equipment, Bolt Tensioning Tools And Jacking & Re-Railing Equipments. Also, Suitable For Earthmoving And Material Handling Equipments. CORE : Thermoplastic Elastomer REINFORCEMENT : Double Braids Of Aramid Fibre With Single Steel Wire Braid COVER : Orange Color Polyurethane. Available Twin And Multi Lines With Different Hose Combination And Size TEMPERATURE RANGE : -40˚C to +100˚C. Temperature Not Exceed +70˚C For Air And Water Based Fluids

SUNFLEX THERMOPLASTIC HOSE TYPE 714 - 1 WIRE AIRLESS PAINT SPRAY Sunflex Thermoplastic Hose 714 - 1 Wire Paint Spray Hose A high pressure, high performance, airless paint spray hose specially designed to meet the exacting requirements of the industry. Steel braid reinforcing ensures strength and guaranteed electrical conductivity. This hose offers optimum resistance to a wide range of fluids including paints, chlorinated solvents and other chemicals. Cover pin-pricked as standard. Applications: Airless Paint Spray Equipment Construction: Type 714 comprises of a nylon 6 tube reinforced with one braid of brass coated high tensile steel wire. The blue outer cover is polyurethane, other colours are available to special order. Performance: Min/Max continuous service temperature range -40oC to 95oC

SUNFLEX SAE 100R8 THERMOPLASTIC HOSE BS4983 TYPE 2 ISO3945 Sunflex Thermoplastic Hose - SAE 100R8 An all-purpose high pressure hose meeting SAE 100R8 working pressure standards and benefiting from the increased flexibility of SAE 100R7 dimensions. Suitable for many hydraulic and pneumatic systems., compatible with hydraulic oils, grease, fuel oils, mineral oils and most phosphate esters. For water and water-based hydraulic fluids, temperature is limited to 70oC.

SUNFLEX THERMOPLASTIC HOSE - SAE 100R8 TWIN An all-purpose high pressure hose meeting SAE 100R8 working pressure standards and benefiting from the increased flexibility of SAE 100R7 dimensions. Suitable for many hydraulic and pneumatic systems, compatible with hydraulic oils, grease, fuel oils, mineral oils and most phosphate esters. For water and water-based hydraulic fluids, temperature is limited to 70oC.

X Series SAE 100 R1AT / EN 853 1SN Application : Construction/Agriculture Machine, Industrial Equipment, Machine Tool & Various Hydraulic System Operating Temperature : -40°C to +100°C

X Series SAE 100 R2AT / EN 853 2SN Application : Construction/Agriculture Machine, Industrial Equipment, Machine Tool & Various Hydraulic System Operating Temperature : -40°C to +100°C

SAE 4SH / EN856 Application : Construction/Agriculture Machine, Industrial Equipment, Machine Tool & Various Hydraulic System Operating Temperature : -40°C to +120°C (-40°F to +212°F)