Oil Seal or Shaft Seal
Type: TC, TB, TA, SC, SB, SA, VC, VB, VA, KC, KB, KA, DC
Material: NBR,VITON.FPM.FKM,CR,VMQ,NR Rubber
Usage: Engine, Transmission, Rear Axle Standard: Standard, Nonstandard
Product Description: Rubber Oil Seal :Motor part, auto part, car part Good Resitance To Wearing Flexible And Easy To Assembly Good Hydraulic Proof Important Physical Properties :
-Hardness85 ShA
-Working Temperature: -40~+100
-Working Pressure: ≤ 250bar
Introduction:
It is a kind of spare parts which are often applied to seal the oil, the other name of oil seal is swivel bearing lip-type packing.
As we know that there is some oil would go-in the rubbing parts of the machine usually and in order to resistant against this oil we need to use the oil seal to seal the gap of the machine. More than that, we have to concern to how to seal the water, chemical liquid and the dust, all of these environment calls for the oil seal.
Features:
1). Excellent durability and flexibility in using.
2). Specially designed cords enhance durability and length stability.
3). Excellent in resistance against heat, oil and wear...
4). Show stable in high speed rotation.
5). Resistant to heat, oil, fatigue, aging and friction due to excellent and special frame
6). Large power, high speed, long service life, small distortion, less space occupying
Application:
1. Fluid system (static &dynamic), Hydraulic system (dynamic), Pneumatic system (dynamic), Oil or grease media sealing, Water media sealing.
2. Applied for electric motors, internal combustion engines and power transmission equipments.
3. Adopting scientific technical composition, specially selected first class rubber material (3M)and low elongation reinforcing.
4. Sanai rubber oil seal is in accordance with related international standard.
5. High wearing resistance, low elongation and long life
Structure:
1. Material: NBR, SILICONE, VITON, HNBR, CR, PTFE, EPDM, etc. According to your requirement.
2. Types of Rubber Oil Seal: TC, TB, TA, SC, SB, SA, VC, VB, VA, KC, KB, KA, DC, DB etc, also can make on your design.
-Good chemical resistance
-Good resistance to heat and low temperature
-Good resistance to ozone and weathering
-High resistance to water
-Low compression set
-Good elasticity
-Raw material cost
Material Type |
Temperature describe |
performance |
NBR (Buna-N,Nitrile) |
-25~100 °C |
1.Oil resistant, water resistance |
|
|
2 Good compression slanting, anti-wear and elongation |
|
FPM,FKM (Viton® (A) Fluorocarbon) |
-20~250 °C |
1.Corrosion resistance |
|
|
2.High temperature resistance, |
|
|
3.antistatic |
|
CR (Polychloroprene Rubber) |
-50~150 °C |
1.Oil resistant, water resistance |
|
|
2.flameproof |
VMQ (Silicon Rubber) |
-30 ~150°C |
1.Corrosion resistance, |
|
|
2.high temperature resistance |
|
NR(Natural Rubber) |
-25~150°C |
1.Wear resistance |
|
|
2.heat resistance |
|
HNBR,HSN (Hydrogenated Nitrile) |
- 62~204°C |
1.Oil resistant |
|
|
2.temperature resistance |
TC (Double Lip Seal ซีลขอบยางสองลิป)
SC (Single Lip ซีลขอบยางลิปเดียว)
TB (Double Lip ซีลขอบเหล็กสองลิป)
SB (Single Lip ซีลขอบเหล็กลิปเดียว)
TCN-TA (Double Lip ซีลขอบเหล็กสองลิปแบบมีเหล็กปิดตูด)