E-Catalog > Hydraulic Hoses ALFAGOMMA > PETROLEUM SUCTION HOSE OR FUEL - OIL S&D T605 - 10 BAR OR 150 PSI BLACK

PAGE VIEW : 11,724

Product Information :

Name :
PETROLEUM SUCTION HOSE OR FUEL - OIL S&D T605 - 10 BAR OR 150 PSI BLACK
Category :
  1. เครื่องจักร, อุปกรณ์เกี่ยวกับเครื่องจักร, เครื่องมือกล
Sub - Category :
  1. Hydraulic Hoses ALFAGOMMA
Brand :
ALFAGOMMA
Product Type :
  1. สินค้า, ผลิตภัณฑ์
Short Description :
PETROLEUM SUCTION HOSE OR FUEL - OIL S&D T605 - 10 BAR OR 150 PSI BLACK T605AA - 150 PSI Black Petroleum Suction Hose Application: For suction and discharge applications in truck and tank car transfer of gasoline, oil and other petroleum-based products with up to 50% aromatic content. Note: T605AA is not recommended for use on a reel. WORKING PRESSURE : Constant Pressure 150 PSI Construction : -Tube: Black conductive NBR -Reinforcement : High tensile textile cords and steel helix wires. Cover : Black CR – abrasion, ozone and hydrocarbon resistant. Temperature : -22 to 176 ºF ,-30 to 80 ºC

Product Detail :

                     PETROLEUM SUCTION HOSE OR FUEL - OIL S&D T605 - 10 BAR OR 150 PSI BLACK

          T605AA - 150 PSI Black Petroleum Suction Hose

           Application: For suction and discharge applications in truck and tank car transfer of gasoline, oil and other petroleum-based products with up to 50% aromatic content.

           Note:  T605AA is not recommended for use on a reel.

          WORKING PRESSURE : Constant Pressure 150 PSI

           Construction :  

                       -Tube: Black conductive NBR

                      -Reinforcement : High tensile textile cords and steel helix wires.

            Cover : Black CR – abrasion, ozone and hydrocarbon resistant.

            Temperature : -22 to 176 ºF ,-30 to 80 ºC

            Packaging : Coils

            Branding : ALFAGOMMA – ITALY T605 – 10 BAR (150 PSI) PETROLEUM – S & D (in red letters)

            Couplings : Combination nipples attached with bands.

            Lengths : 100 feet: 3/4" through 6", 20 feet: 6", 8"

            Colors : Black


Product Gallery :

Related Product :

Flexible Stainless Steel Hoses :SUS304,SUS321,SUS316
Brand : AUTOFLEX
Last Update : 09/12/2558 15:10 Preview : 21,494
Flexible Stainless Steel Hoses Seal Flexible stainless steel hose (sleeves) sealed, are designed for transportation of liquid and gaseous media, for water, steam, condensate, gas and petroleum products, chemical products. Operate in extreme conditions, operating pressures and temperatures. Spiral shaped convolution spiral advance profiled steel band with subsequent contact and seam welding. They have a diameter of 6 mm to 300 mm and lengths from 250 to 6000 mm. For the production of this type of hose used stainless strip thickness 0,15-0,40 mm. High-quality steel airtight hose is not advisable to use in systems with a high level of vibration as the exploitation of metal hoses in such conditions leads to a resonant vibration of the corrugations or shells entirely. Spiral represented by two species - rolled and corrugated variations. Corrugated metal oloruka made of seamless or longitudinally welded thin-walled tubes, which are formed by special mechanical or hydraulic devices and supplied with end fittings. They are used as low-cost flexible connecting elements as loading hoses and of movement, thermal expansion, vibration absorption. Corrugated metal hose is completely waterproof, can be used to transfer liquids and gases under high pressure. In addition, the hose to the valve can be used in vacuum systems. Addition weld metal hoses we supply hoses with flange with thread. Due to the high reliability and durability to impacts flexible connection was in demand in the market pipelines and has been widely used in the automotive, aerospace, shipbuilding, metallurgy, petroleum, chemical, food, medical industry and many other industries.
FLEXIBLE HOSE LARGE SIZE DIAMETER SUS304 LARGE DIAMETER STAINLESS STEEL METALIC CORRUGATED FLEXIBLE HOSE : DN100 (4”)  – DN600 (24”)
Brand : AUTOFLEX
Last Update : 22/09/2559 20:11 Preview : 29,442
TUBE AND BRAID AVAILABLE : SUS304/SUS316, BRAIDED MESH LAYER : SINGLE LAYER ท่ออ่อนสแตนเลส เกรด 304 ขนาดใหญ่ ใช้สำหรับงานประปา งานชลประทาน งานน้ำทั่วไป งานสตรีม DN100(4") - DN600 (24") (inch) stainless steel flexible hose with flange fitting : 1.Excellent Flexibility 2.Resistance to Corrosion 3.High Temperat 6"- 16" (Inch) Stainless Steel Flexible Hose With Flange Fitting: 1 High Physical Strength With Light Weight. 2 A Long UsaGe Life. 3 Good Corrosion Characteristics, Resistance to Fire,Moisture, Abrasion and Penetration. 4 Flexibility Making it Good For Static Installations or Even Where There is Constant Flexing in The Application 5 Absorbs Vibration and Noise From Pumps, Compressors, Engines Etc. 6 Compensates For Thermal Expansion and Contraction of Piping. 7 Corrects Problems of Misalignment. 8 A Flexible and Quick Alternative For Rigid Piping in Difficult Locations. - Iron & Steel Industry (อุตสาหกรรมเหล็กและเหล็กกล้า) - Petroleum and Gas Plants (ปิโตรเลียมและก๊าซ) - Chemistry industry (พืชอุตสาหกรรมเคมี) - Heating and cooling systems (ร้อนและระบบระบายความร้อน) - Food industry (อุตสาหกรรมอาหาร) - Automotive industry (อุตสาหกรรมยานยนต์) - Paper production plants (โรงงานผลิตกระดาษ) - Maritime industry (อุตสาหกรรมการเดินเรือ) - Defence industry (อุตสาหกรรมกลาโหม) - Moving systems (ระบบการย้าย) - Any kind of depot and tank connections (ชนิดของคลังและการเชื่อมต่อถัง)
RUBBER FLEXIBLE JOINT SINGLE SPHERE-MAT.EPDM/NEOPRENE/NBR
Brand : POFPO
Last Update : 23/09/2559 11:18 Preview : 28,067
POFPO Rubber flexible joint are desi gned for tough demanding indusreial application,as found in : Air conditioning-heating and ventilating systems,chemical-petrochemical and industrial process piping systems. Power generating systems, marine service, pulp & paper systems,water-wastewater sewage and pollution control system. Instsalled next to mechanical equiment or between the anchor point of piping system. Specify the POFPO Rubber flexible joint to : 1.Absorb pipe/movement/stress 2. Decrease systems noise 3. Isolate Vibration 4. Compensate alignment/offset 5. Eliminate electrolysis 6. Protect against start up,Surge forces Features: -Vibration,Sound And Shock Absorption -Higher Burst Strength -Greater Recovery From Movement -Free From Corrosion -Security Assured In Usage -Low Deformation Under Pressure -Suitable For Suction And Delivery -Greater Movements are Availlable
 Blind Flanges :SS304,CARBON STEEL
Brand : AUTOFLEX
Last Update : 23/08/2559 20:49 Preview : 19,595
Carbon steel blind flanges Specifications: 1.Standards: ASME B16.47, ANSI B16.5, DIN, UNI, BS, JIS, GB. 2.Pressure classes range: from 150lbs to 2,500lbs. 3.Sizes range: 1/2" - 24" . 4.Materials: F316, F304, F316L, F304L, A105, F5, F11, F22, 15CrMo, 12CrMoV, Q235, 16Mn, 20#. 5.Printing: Carbon steel and alloy steel with yellow print, black print, oil or zinc.
SLIP - ON FLANGES : SS304,CARBON STEEL
Brand : AUTOFLEX
Last Update : 23/08/2559 21:02 Preview : 19,581
SLIP - ON FLANGES Specifications 1.Size:3/8"~40" DN10~DN1000 2.Pressure American Series: CLASS 150, CLASS 300, CLASS 400, CLASS 600, CLASS 900, CLASS 1500, CLASS 2500 European Series: PN 2.5, PN 6, PN 10, PN 16, PN 25, PN 40, PN 63, PN 100, PN 160, PN 250, PN 320, PN 400 3.Flange Facing Types American Series: Flat Face (FF), Groove (G), Ring Joints Face(R)
Rubber Sheet Mat.NBR,EPDM,HNBR,VITON ประเก็นยาง
Brand : AUTOFLEX
Last Update : 30/11/2558 09:38 Preview : 22,152
CAMLOCK COUPLING & GROOVE AND PIN LUG COUPLING - PIN LUG HOSES
Brand : AUTOFLEX
Last Update : 16/09/2559 15:32 Preview : 21,668
CAMLOCK COUPLING & GROOVE AND PIN LUG COUPLING - PIN LUG HOSES (PIN LUG COUPLING AND PIN LUG HOSES SHANK) We are offering pin lug coupling, pin lug hose shank, suction hose coupling. sizes: 1-12" to 6"parts: full set, female set, male set,brass nut body material: aluminum body with brass nut aluminum brass pin-lug couplings are built of lightweight aluminum with brass pin-lug nut for long lasting durability. Pin-lug style assures strength and reliability. Can be used with hoses capable of handling water or other liquids, providing increased adaptability. Will require clamps to attach hose. Available in sizes 1-12"-6" as female, male and coupling set.
HYDRAULIC HOSES GROUP
Brand : ALFAGOMMA
Last Update : 30/08/2559 10:19 Preview : 10,557
FLEXEOR 1SN/R1AT ISO-1436–SEA 100R1AT/R1S Hydraulic Hose.single wire braid hydraulic hose on easy-to-handle reels-tr1sn.tr1sn-formerly t836aa/t836aa.single wire braid : meets or exceeds sae 100r1at-en853 1sn msha ic-152/8 approved. FLEXOR 2SN/R2AT ISO-1436-1–SEA 100 R2AT/R2S Hydraulic Hose.double wire braid hydraulic hose on easy-to-handle reels-tr2sn.tr2sn-formerly t846aa.double wire braid: meets or exceeds sae 100 r2at-en 853 2sn msha ic-152/8 approved tr2sn-formerly t841aa.double wire braid:Meets or exceeds sae 100r2a FLEXOR 3 SAE 100R3-EN854 R3–DN Hydraulic Hose.textile-reinforced hydraulic hose with two braids-tr3.tr3-formerly t870aa.two High tensile textile braids-meets or exceeds sae 100r3-en854 r3–dn FLEXOR 4SP SAE 100R12-EN 856 4SP and ISO 3862 Hydraulic Hose.four layer wire spiral reinforced hydraulic hose-t4sp.t4sp-formerly t850aa.four wire spiral :-meets or exceeds sae 100r12-en 856 4sp and iso 3862-meets flame resistance acceptance designation us msha ic-152/8 FLEXOR 5 SAE 100 R5 Hydraulic Hose.One-wire braid hydraulic hose-TR5.TR5-formerly t805aa One-wire braid-reinforced-Meets or exceeds sae 100 r5
STEAM HOSE AH-RED/AH-BLACK : EPDM T330AH / T330AA - 17 BAR OR 250 PSI
Brand : ALFAGOMMA
Last Update : 30/08/2559 10:37 Preview : 11,009
STEAM HOSE AH-RED/AH-BLACK : EPDM T330AH / T330AA - 17 BAR OR 250 PSI T330AH /T330AA - 250 PSI EPDM STEAM HOSE APPLICATION:The transfer of saturated steam up to 250 PSI AND 406°F. Use with superheated steam will shorten hose life. * Proper draining of steam hose after each use will increase service life. * Not recommended for washdown applications where detergent or oils are present. WORKING PRESSURE : Constant Pressure — 17 Bar (250 PSI)

Other Product In Group "Hydraulic Hoses ALFAGOMMA (13)"